| Title |
Publisher |
Price |
This set, Gelatinous Stool, is a hilarious take on a classic foe by our co-founder Colin Christenson. Colin has been working on amazing ideas for years, and is the creator of the Sky Islands campaign that makes up the horizon of the World of Aach'yn. When he announced he was working on a Sky Islands sewer, I mentioned to him that all who worked on them before had produced a "turd" asset for us to... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL terrain was built to expand the World of Aach'yn. It is a desolate and dangerous place; the cultist of Zol'Tigan are known for kidnapping stranglers on caravans and even straight from the major cities. The unwilling are sacrificed to bring forth the Demon Prince Zol'Tigan into the mortal plane, where he can grant evil wishes and summon undead armies from the victims. ... [click here for more] |
Aether Studios |
$16.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his tower... his tower... Let's just say you would only go there if you were very, VERY desperate to save someone... someone so important to you, that your own life was hardly a consideration. Because you'd surely be leaving it behind.... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable STL miniatures and terrain brings a Gnoll party to life. It includes a Gnoll Chief, Brute, and Scout, as well as their camp site. Two of the gnoll miniatures should be printed with supports, and the supports are built into the models -- simply remove them after printing.
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill:... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable STL miniatures and terrain brings an Orc tribe to life. It includes:
An Orc smith (two versions provided, with built-in supports for FDM and resin printers)
An Orc warrior
The Orc king's throne, with or without the king himself
An Orc hut
An Orc watchtower
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill: 10% recommended... [click here for more] |
Aether Studios |
$12.00
|
This set features many different options for helping to build out Orc villages. The Orcs of the Orgraki are fearsome warrior who prefer to lead balanced lives. Led by Kurk Orgraki, they embrace both the old ways of hunting and the new ways of gathering. We hope they make a welcome addition to your Orc Lands.
... [click here for more] |
Aether Studios |
$8.00
|
Dare you enter where spirits tread? Deep in the wilds of Aachy’n there lies a long forgotten hidden temple. Ravaged by time and mighty beasts this temple still stands. What lies inside beside the dead? Treasures, forgotten secrets and lore? Come, find out! Large walls, Grand entrances, caves and more!
... [click here for more] |
Aether Studios |
$15.00
|
Ben Gayer is the artist who sculpted this Large three part Cypress tree. Inside are room for 2 minis to hide in ambush, awaiting their prey. This great Cypress Hideout was sculpted for the patrons of Aether Studios. The tree parts print without supports and connect with Dragonbite clips.
... [click here for more] |
Aether Studios |
$3.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his cultists live only to serve him. Therefore, they must be able to gather and hold the "raw material" for these terrible ceremonies. The bone pits are where such unfortunates may be found.
This set includes both a scatter version... [click here for more] |
Aether Studios |
$4.00
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s... [click here for more] |
Aether Studios |
Pay What You Want
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn't want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This expansion allows for sewers of difference sizes, both half sized, double height, and 4x4 spaces. Will and Carl powered through all month to make... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable village signs lets you outfit any DragonlockTM-compatible building with custom hanging signs. It includes both a variety of plain designs for your own artwork or decals, and textured wood signs that announce their own purpose. Overall there are more than 20 STL models of the signs, plus several pole and hook models that the signs can hang from.
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$8.00
|
This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life. We later released this as a patreon reward to our amazing... [click here for more] |
Aether Studios |
$1.00
|
When you are looking for a desert guide, there is no one better equipped to get you through the silt-seas of Aach'yn than Kesa Tartalan.
Nasos Maloudis sculpted up this model. Kesa is a desert guide extraordinaire. She knows every back trail, every danger, and every shortcut across the silt seas.
This model prints completely without supports on FDM Machines.
... [click here for more] |
Aether Studios |
$1.00
|
This set goes out to all our Patreon and MMF Tribes subscribers, $2 and up.
This set, Swole Caverns, is one that has been long requested but rarely on workscreen. We had long wanted to make our own mark of caverns, but we wanted to make something unique. This set continues the work of AECAVE0 - Rich Caverns and integrates fully with those models. It is also where the name comes from. Rich Caverns... [click here for more] |
Aether Studios |
$2.00
|
Aztlan is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. Aztlan Clip-On was one of our most often requests. We wanted to make sure the first set had everything you needed to get started, but to get the full utility of this set, we recommend you pick up free the Aztlan... [click here for more] |
Aether Studios |
$15.00
|
Time to construct some Dark Dwellings, This set gives everything you need to start all your own large dark manor. This free starter set of dragonbite compatible tiles will let you dip your toes into the Dark Terrain series. All of these unique tiles are designed for building, stacking, and growing your collection.
... [click here for more] |
Aether Studios |
Pay What You Want
|
This set is included in our 12-month loyalty pack for Patreon or MMF Tribers pledging $15 or more
This set, Dockyards, was one of our first big projects as a studio. Colin and Will double-teamed it back in August/September 2018. Since then, it has had dozens of expansions and updates. The Port Elizabeth Harbor set is the latest evolution, replacing the original 8 Dockyards sets with one master set.... [click here for more] |
Aether Studios |
$5.00
|
A full rework of the sand dunes is now complete thanks to Carl and Will. Over 80 of the finest dragonbite tiles ever sculpted for desert adventures.
Recommended Print Settings:
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible, but models will be less sturdy.
Top/Bottom Layers:... [click here for more] |
Aether Studios |
$17.00
|
Included in this set of 3d printable terrain you will find 19 .STL models for creating dwarven dungeons. This tile set features walls, doors, corners, and corner pillars needed to make rooms of any size that connect to each other with Dragonbite clips.
This set has 3 styles of terrain:
Resized Legacy tiles match our original sculpts, but as the name suggests they are all slightly resized to match... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL files includes key elements Clan Ingot Breaker for your Dwarven maps:
The Dwarven Ingot Breaker, an enormous drill machine with space for minis.
A flatbed ATV cart, and a scatter anvil (for forging wherever it might be required)
Floors with iron golem parts (because what else do you mine for)
Floors with various piles of ore
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$13.00
|
Mines. Sure, you can wheel everything around on mine carts. But you have to dig DEEP to get to the ore, and it gets to be a real drag lugging a mine cart up a long hill. You could make your Goblin slaves push the cart, but then you have to walk all over the place to make sure they do it.
So... two birds, one stone. Use the Lifts of Clan Torr'son to move piles of ore up several levels. Bonus:... [click here for more] |
Aether Studios |
$5.00
|
This set of 80 3D-printable STL files includes numerous floors, walls, doors, and corridors, many with unique engraved detail. It also features a centerpiece tile with a statue of the King of the Dwarves! These pieces build on the Dwarven Holds Core set and individual Dwarven Hold sets to expand your dungeons and mines with new variety and amazing detail.
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$15.00
|
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 4 3d printable .STL files for your tabletop games.
TERRAIN Recommended Print Settings:... [click here for more] |
Aether Studios |
$5.00
|
This expansion of our popular Dwarven line of terrain was done mostly by Aether fan, patron, and remixing revolutionary, Marc Weatherhogg. Marc took the initiative on this set and came up with the ideas and hard work, test printing, and revisions needed to make it happen! Inside you will find 25 3d printable .stl files for your tabletop games.
Recommended Print Settings:
Layer Size:... [click here for more] |
Aether Studios |
$6.00
|
This set contains the models for Clan Atlan’s Bastion. 6 models assemble together to make a massive playset of dwarven adventure. Also included are 6 scatter models of dwarven scenery to enhance all of the glorious halls of your stonefolk. In the World of Aach’yn, Clan Atlan is the strongest, wealthiest and proudest of the 9 families of stone. All over the planet, Clan Atlan guards their mines,... [click here for more] |
Aether Studios |
$13.00
|
Turu is the Shellfather of all turtle-kind and is a generally a friendly deity to those who respect his many children. Turu is not the largest or strongest god, but he is quite possibly the oldest. The children of Turu who reach the size of their father are few, generally dying of heart break. The loss of a favorite dwelling, water, or food source can be deadly to those who grow attached to the physical... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL files, Cracked Marble Floors, came from a request on the Fat Dragon Games Forums. I didn’t think it would work, but it did. I tried to think of a walls set that would fill out the set, but I couldn’t find the the right fit. So, here is a big set of floors; see the related sets below for some clip-on walls that will work well with them.
Recommended Print... [click here for more] |
Aether Studios |
$1.00
|
Create elaborate hedge mazes with these 3D-printable STL files. This Hedge Mazes set includes walls, posts, corners, arches, and a gate paired with both a natural ground style and a Herringbone style brick floor that you might find in the Hedge Maze behind a Lord's manor.
These tiles are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$1.00
|
This set of printable terrain STLs is the start of a new style of jungle walls and buildings, with a very special dungeon entrance piece! You can see models in this set here.
It was the July 2018 DungeonPrint Community Choice selection and has been updated multiple times since release.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill:... [click here for more] |
Aether Studios |
$6.00
|
This set of 3D printable terrain augments the Konga Rising terrain with a new set piece -- a large 6x6" sacrificial rock. There are versions with a DragonbiteTM base and without (in case you want to lay it on top of existing terrain), as well as a bonus 6x6" dirt tile.
NOTE: your printer must have at least a 6"x6" print area to print these pieces!
Recommended Print Settings:... [click here for more] |
Aether Studios |
$4.00
|
Konga: A Dark Place contains two 3D-printable STL models of the skull rock shown on the cover, one on Countryside Dirt terrain on a DragonbiteTM base, and a separate scatter terrain variant that doesn't include a base of its own.
See it in Sketchfab - https://sketchfab.com/models/f23e6e926e374995ba009db3331cc777
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$2.00
|
The Alien Lair Core Set is the main building block set of the Alien Lair series. Included in this set are the walls, corners, curve walls, and other models needed to make full, diverse alien lair dungeons. The origins of this set go back to 2017 when Colin Christenson released the Alien Space Ship set on the Dragonbite Community Creator. That set featured exceptionally clean and beautiful lines, so... [click here for more] |
Aether Studios |
$4.79 $1.00
|
Aether Studios' Nasos Maloudis brings us this amazing Hive Queen to match the new Alien Lair terrain. This 100mm mini prints completely supportless. You can find more terrain in this series right here!
RECOMMENDED PRINT SETTINGS
● Layer Size: 0.15mm recommended, 0.1mm for smoother features
● Infill: 20% Minimum
● Top/Bottom Layers: 6 (or 0.9mm if using a different... [click here for more] |
Aether Studios |
$3.00
|
Aether Studios' Nasos Maloudis brings the hive into its next evolution with this fantastic expansion of 3d printable stl format scatter models for your Alien Lair! These models are so terrifying and inhuman that you are guaranteed to stoke the worst fears of your players. You will find 13 models included in this set for 3d printing. This set was available to the patrons of Aether Studios in October... [click here for more] |
Aether Studios |
$7.00
|
Aether Studios' Nasos Maloudis brings the latest to the Tycho Series with a terrifying expansion of 15 3d printable stl format Dragonbite compatible tiles for your Alien Lair! These tiles will not fail to fill your players with fear!
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended.
Top/Bottom... [click here for more] |
Aether Studios |
$8.00
|
This set of 3D-printable STL models includes multiple bridges to populate your maps. There are tree trunks to lay down as bridges, rock bridges (with base on either end), wood plank bridges, an ice bridge, and a spectacular vine-covered bridge between two hollowed-out trees. The wood and vine bridges each clip together to span still larger chasms!
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$10.00
|
This set includes several types of models to populate your peaceful gardens -- planters, trees, a pond with two styles of bridge, and large stone pathways.
The center of the bridge prints in two parts, and you should glue the two parts together.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% for all models recommended,... [click here for more] |
Aether Studios |
$17.00
|
This set of 3D-printable STL terrain is a companion to Peaceful Gardens, the May 2018 DungeonPrint Community Choice set. It includes four large fountains:
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side... [click here for more] |
Aether Studios |
$5.00
|
This set of 3D-printable terrain include floors, walls, corners, and doors in an Egyptian theme. The bases are compatible with all DragonbiteTM terrain. The walls use a new slot style to allow you to customize the pieces -- walls, corridors, and corners -- with far greater ease and reusability.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$10.00
|
Enter the world of the Sea Elves, Beauty abounds as is the Elven custom. Whether it is the gates, walls, or canals this set speaks Elf. This set was specially made for one of our favourite patrons. We have big plans for this set series with the next expansion coming for Patreon and Tribes subscribers in March 2024.
... [click here for more] |
Aether Studios |
$13.00
|
Seraphim is our “Greco Roman Marble/Granite” style terrain for temple style dungeons and structures. It is built on top of the Dragonbite base with a 1 inch grid for interoperability with other tile-sets. Every 2x2 tile has space for LEDs using our LED Slot. This core set includes all the basics you need to get started building a classic marble temple. Floors, Walls, Corners, Stairs, – everything... [click here for more] |
Aether Studios |
$3.19 $1.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes pillars, pools, secret... [click here for more] |
Aether Studios |
$7.99 $1.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes walls, corners, and corridors... [click here for more] |
Aether Studios |
$11.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes several styles of decorative... [click here for more] |
Aether Studios |
$5.00
|
This set of 3D-printable STL models includes 2 models that combine to make a huge scatter Crocodile Skull repurposed into a dwelling. The two sections print supportless and connect with dragonbite clips. The miniature is shown for scale and is not included, but you can find him here!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill:... [click here for more] |
Aether Studios |
$8.00
|
Ben Gayer is the director of this project, which features 32mm scale modern buildings. Ben is a fanatic for good modern terrain, and this set is his opus. He continues to add to it, increasing the tiles in collaboration with our patrons. In particular, Roy Trahan, Dracrius and Drakir, who have both helped make the Modern Urban series grow.
This set features a standard build with guide included below,... [click here for more] |
Aether Studios |
$14.00
|
Modern Urban Terrain is a collaborative series from Ben Gayer, Will Walker, Nasos Maloudis, and the Patrons of Aether Studios.
Ben Gayer is the director of this project, which features 32mm scale modern buildings. Ben is a fanatic for good modern terrain, and this set is his opus. He continues to add to it, increasing the tiles in collaboration with our patrons. In particular, Roy Trahan, Dracrius... [click here for more] |
Aether Studios |
$9.00
|
Ben Gayer is the director of this project, which features 32mm scale modern buildings. Ben is a fanatic for good modern terrain, and this set is his opus. He continues to add to it, inreasing the tiles in collaboration with our patrons. In particular, Roy Trahan, Dracrius and Drakir, who have both helped make the Modern Urban series grow. This set features Will’s Diner, a classic 50s style location... [click here for more] |
Aether Studios |
$11.00
|
Modern Urban Terrain is a collaborative series from Ben Gayer, Will Walker, Nasos Maloudis, and the Patrons of Aether Studios. Nasos Maloludis sculpted these miniatures upon request. Most zombies are simple rotters, we wanted some zombies where they had personality and backstories for the modern era. we hope you feel we accomplished this with success in this first publication.
These minis are designed... [click here for more] |
Aether Studios |
$5.00
|
Log In 
