| Title |
Publisher |
Price |
This is an add-on set for the Fat Dragon Games Tavern sets.
This set includes peg holes in both the classic and clip-on tavern walls as well as a dartboard, two shelves holding bottles and an empty shelf.
For Dragonbite clips, https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346&filters=0_0_0_44593_0 ... [click here for more] |
Fat Dragon Games |
$4.99
|
This is a set tile edge clips with a wooden texture on it that can be attached to any Fat Dragon Games standard sized tile as well as the Seperate Tavern Angled Walls A and B. This set does not include any tiles, just the clips. ... [click here for more] |
Fat Dragon Games |
$1.99
|
A double wide timber post and a solid center post. I made these for my friend, Lou Anders becuase he had a need for them. The double wide post is good for shoring up wall connections. The center post is good for a support in a large room. The picture shows the double wide post. Both use the rounded pegs to secure them to floor tiles.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Our good friend and patron Tim requested this. He was very kind to test print it and take pictures. Tim has been a supporter of Aether for a long time, and he continues to inspire us to make amazing things. Thank you Tim. Thank you to all our patrons who make it possible for us to do what we love.
... [click here for more] |
Fat Dragon Games |
$0.99
|
This set includes windowed walls from Fat Dragon Games Village sets 1,2, and 3, and also double sided walls windows. They have been modified to allow the shutters to open, and also include shutters remixed from FDG Village sets 1,2,and 3. This set does not include any windows, you will need the village sets for those. You can put a window on the inside of the sil, and a shutter on the outside. Wooden... [click here for more] |
Fat Dragon Games |
$7.95
|
I am happy to offer this cavern deck expansion. This set includes all the tiles necessary to run decks along the waterline and over the water. This set can easily double as a dock set. Check out the preview below and enjoy!
Set Preview:
:lang="en">Wet Cavern Decks
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well.... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.
(If you want the same models with wavy water... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models... [click here for more] |
Fat Dragon Games |
$14.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns... [click here for more] |
Fat Dragon Games |
$10.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
This set of 3D-printable STL models continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes models for two styles of wet dungeons, one with a brick edge and one with a rougher natural edge. These models include water flowing through various doors, archways, and wall cracks, connecting pools in adjacent rooms. They can be mixed with other Wet Dungeons... [click here for more] |
Fat Dragon Games |
$12.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes two styles of wet dungeons, with a brick edge and with a rougher natural edge. These models include wet floors adjacent to dungeon walls, and they can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain water tile that matches... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on natural-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
Log In 
