| Title |
Publisher |
Price ▲ |
Included in this set are 4 new FDG remixes allowing for more complex room designs. The Curved T-Wall comes in 4 flavors: Vanilla, Torch, Ruins, and Dank Catacombs.
... [click here for more] |
Fat Dragon Games |
$1.99
|
Here are some basic cavern edges. They are short enough for overlapping cavern levels. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$1.99
|
Included are seven Eight 3d models in .stl format of Herrinbone Brick dungeon and village street tiles. These tiles print great with layer height at .2 or less. A wonderful addition to any village, town, or city encounter. Two of the old legacy "Long Brick" are also included, but not shown on the cover.
Tiles are mounted to Fat Dragon Games Dragonlock tile system bases. ... [click here for more] |
Fat Dragon Games |
$2.00
|
This collection of 1 Inch Miniature Bases is perfect for matching with your own miniatures that need an outdoor, natural base.
Bases include Grass, Rough, Rocky, Snow, Dungeon, Cavern, Wood, and Cobblestone textured Bases.
Crafted upon request of community member @Olaf on the Fat Dragon Games Forums. ... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this download are .stl files for 16 different landscape textures, 4 each of Grass, Rough, Rocky, and Snow Drift terrain.
Each one is mounted to DRAGONLOCK™ Ultimate bases for use with other Fat Dragon Games tiles!
... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this model are 8 9 models for Fat Dragon Games Dragonlock system. These 2" Separate Walls are available in the following flavors.
Alcove (added 9-24-18)
Cthulu Brain
Cobra
Eye Symbol (Pristine)
Eye Symbol (Ruined)
Web Crests
Spider Crests
Large Spider
5e Medal
Many thanks to the contributing artists who lent very wonderful textures under the lovely CC-AO License.Elazro,... [click here for more] |
Fat Dragon Games |
$2.00
|
Included in this set are 4 new Ruined Dungeon Walls and 2 new Ruined Dungeon Corners. Thank you to Tom for the FDG CC program that allows these wonderful remixes.
... [click here for more] |
Fat Dragon Games |
$2.99
|
The FDG Village 4x4 street tiles, gridded upon request for the FDG Facebook Community. A special thanks the Raphael Fellipe for his help test printing. Includes 9 4x4 tiles from the Village Streets.
... [click here for more] |
Fat Dragon Games |
$3.00
|
Durty roads for Lou Anders. Straight, Curvy, fourway, and threeway versions of durty and snowy roads. Also including a durty to brick transition tile. Print at .1-.2, with 0-10% infill. ... [click here for more] |
Fat Dragon Games |
$3.50
|
Asian Altars, Pillars, and Basins is a Fat Dragon Games Dragonbite Community Creator set with 17 brand new .stl files to add an oriental theme to your games.
The full list of files includes:
2x2 Asian Floor
2x2 Pool Tile (Asian and FDG Dungeon floors)
2x2 Spiral Dais (Asian and FDG Dungeon floors)
Dragon Pillars (Left and Right)
Dragon Basins (Left and Right)
Torii Shrine for Gong
Dragon... [click here for more] |
Fat Dragon Games |
$3.99
|
Glad tidings are here! No more shall the long-suffering GMs of this world toil with no escape. Never again shall they be forced to endure session after session of murder-hobo antics. Now, no matter what Fat Dragon Games dungeon your players have seen fit to debase, you'll have the solution. “Rocks Fall, Players Die” is the newest and last Community Creator set you’ll need for... [click here for more] |
Fat Dragon Games |
$3.99
|
This set of 3D-printable space tiles complements the existing Spaceships 1 and Spaceships 2 line of Terran ship tiles, and the Alien Spaceships and Alien Invasion sets of alien ship tiles. It includes several custom STL models for each, expanding the options available for both alien and terran ships.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother... [click here for more] |
Fat Dragon Games |
$3.99
|
Here are a few LED options to go with the cavern deck system. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Decks LED Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
These are like the basic cavern edges, except more dynamic... Bring your multilevel cavern to life with a variety of edge options. Check out the preview below and enjoy!
Set Preview:
:lang="en">Dynamic Cavern Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$4.99
|
Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included.
Note: there are two styles of water tiles in the Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$4.99
|
1st Class Transitions is a set of remixed tiles by Will Walker and Marc Weatherhogg. Patrons of Aether Studios requested more FDG Transitions, and we LOVE to make them. Included in this set you'll find 33 .STL files for mixing between FDG terrain sets.
... [click here for more] |
Fat Dragon Games |
$5.99
|
This set includes 15 prison bar tiles from the fan-created section of the Fat Dragon Games forums. The tiles include:
Tiles with bars along the edge of the base (straight, corner, doorway, etc.)
Tiles with bars across the center of the base (straight, corner, intersections, doorway, etc.)
Dungeon Wall tiles with bars coming out (along both center and edges) and with bars along opposite edge
All... [click here for more] |
Fat Dragon Games |
$5.99
|
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t... [click here for more] |
Fat Dragon Games |
$5.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
Expand the Cavern Decks set with these edge pieces! This set is perfect for making deck overhangs and transitions. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Deck Edges Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$7.99
|
The Chasm series is back with a new update! Rickalias Ebborts took the lead on crafting up these very special remixes for the community. Expand your chasms into cavernous canyons with rock bridges or utilizing some of the Natural Bridge options. You can see all the tiles included in this set below. The large tile on the left is used to support a larger base of tiles above it.
Recommended... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 16 remixed FDG Dungeon tiles with catacombs elements based on user input. It has been a year since I first released the Catacombs floors, later rolled into the Catacombs 1 set and I am glad to be updating it. Thank you to the many artists who published CC-AO and Public Domain assets for use in this set. All are noted in the ReadMe.
Shown with models from others sets: Door... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D printable STL models provides roofs for small houses, such as the buildings in the port village in the Kobold Docks map by Dyson Logos. This includes a pyramid-shaped roof for 4x4" buildings, and 2" roofs for small C, L, or T shaped buildings. These roofs can be used in conjunction with a number of FDG village sets, though the models are based on the roofs from... [click here for more] |
Fat Dragon Games |
$7.99
|
This set lets you make the Red Queen's garden. It includes all the pieces you need to make a hedge maze with or without roses. Also has modified fence pieces, a decortative heart bush, and paint can with brush.
The Village Cemetery set is needed to complete the fence
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free... [click here for more] |
Fat Dragon Games |
$7.99
|
Included in this set are 26 tiles for expanding your catacomb dungeons. Compatible with all other Fat Dragon Games terrain.
... [click here for more] |
Fat Dragon Games |
$8.99
|
Like the core Flooded Dungeons set, this 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set adds new ways to connect your flooded dungeons to caverns and dry dungeons, as well bringing in a mid-corridor doorway and pipe walls to increase the,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain was inspired in part by the introductory 5e Lost Mine of Phandelver adventure. One cavern in that adventure has bushes outside and a stream flowing out through the entry. Another area features a 500 year old cave, recently reopened for mining by new adventurers. These kind of settings suggested some of the cave entries you’ll find here.
Sample layouts:... [click here for more] |
Fat Dragon Games |
$9.99
|
I am really excited about this set. It includes planks, stairs, and ladders for the cavern deck sets, but most of all the bridges! Rope bridges of varying lengths, and perhaps the most exciting, diagonal bridges. Check out the preview below and enjoy!
Set Preview:
:lang="en">Cavern Bridges & Accessories
Recommended print settings are to use the FDG terrain profile at .12 layer height or better,... [click here for more] |
Fat Dragon Games |
$9.99
|
I am excited to share this set! I wanted to create a variation to the existing narrow cavern tiles. These narrow passages are a bit more accessible and easier for players to see the battlefield. It includes, 45 degree, Y and X intersections to create a more interesting cavern path in additional to the traditional intersection tiles. I added some elevation passage tiles as well as a bridge that sits... [click here for more] |
Fat Dragon Games |
$9.99
|
Are you sick and tired of never being able to represent the dragons hoard like you want? I am really excited to share this set! This is the Cavern Treasure set that has all you need, but is recommended to pair with the Core Treasure Set for larger troves!
This set includes 62 unique tiles! With such a huge variety of floor and wall tiles, the possibilities are endless!
I recommend printing in .1... [click here for more] |
Fat Dragon Games |
$9.99
|
The elevated wet cavern deck set adds a fantastic multi-level deck experience to any cave. Check out the preview below and enjoy!
Set Preview:
:lang="en">Elevated Wet Cavern Decks Set
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well. Cheers! ... [click here for more] |
Fat Dragon Games |
$9.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
I am happy to offer this cavern deck expansion. This set includes all the tiles necessary to run decks along the waterline and over the water. This set can easily double as a dock set. Check out the preview below and enjoy!
Set Preview:
:lang="en">Wet Cavern Decks
Recommended print settings are to use the FDG terrain profile at .12 layer height or better, but .2 layer height also works well.... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are:
Faster to print
Easier to see over
Easier to place miniatures close to -- especially important for tight corridors!
These corridors work well with both half-height... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between! These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors)
These lower corridors are:
Faster to print
Easier to see over
Easier to place miniatures... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain brings watery pools and streams to dungeon layouts. It includes two styles of wet dungeons, one with a brick edge and another with a rougher natural edge.
The plain water tile that matches the water texture used in this set can be found in FDG Dungeon Hazards & Traps.
Sample layouts in each style:
Recommended Print Settings:
Layer Size:... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on brick-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
Love the outdoor sets, but wish you could cut down on printing and integrate with battle maps and mats? Well, now you can. Included in this set are edge pieces for each of the three outdoor sets and other 4x4 FDG tiles allowing for seamless integration with battle mats. Check out the following previews, enjoy:
Woodland Hillside Riverside Preview
Print Settings: I recommend using the official FDG terrain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set works as a stand-alone set, ideal for hillsides and plains with small clusters of trees. All tiles are 4x4. This set comes with 25 unique tiles. This set is designed to be utilized with the other Woodland and Riverside sets.
NOTE: This set does not include the Tree Tops. FDG Tree Set required. Set is playable without tops.
Recommended Print Settings:
FDG Terrain Profile
Optimal Layer... [click here for more] |
Fat Dragon Games |
$9.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge... [click here for more] |
Fat Dragon Games |
$10.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections! (The sample layout... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge with... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! Now you can create underground rivers, pools, and lakes up close to lower walls and entrances. Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts!
Why half-height walls? These lower walls are:
Faster to print
Easier... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! (Just as Wet Caverns 2: Wavy Walls did for full-height walls.) Now you can create underground rivers, pools, and lakes up close to low cavern walls and entrances. These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own... [click here for more] |
Fat Dragon Games |
$11.99
|
Gaoler Lou's is your source for FDG Dungeon Windows, Jails, Prison Bars, Shackles, and all the other models you need to make sure those pesky adventurers stay locked up until the trial or other, faster methods of "Justice." Included in this set are new Dungeon windows, with and without bars or grates. There are also Village Walls A-E for a new Prison Wall setup to match Arenwel's awesome prisons.... [click here for more] |
Fat Dragon Games |
$12.99
|
Log In 
