A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here are all compatible with those found in the FDG Cemetery, in case you want to supplement with some unspoiled columns, walls, posts, gates, or post caps.
NOTE: The pictures below show some of the ways the various ruined walls, gates, posts, fences, and post caps in this set can be assembled. You can make additional combinations by mixing and matching and reversing some of the models in your slicer.
Recommended Print Settings:
- Layer Size: 0.15mm, or 0.1mm for finer detail
- Infill: 10% for all models recommended, 5% minimum
- Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
- Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
- Raft/Brim/Supports: none
Related Sets:
- Haunted House -- the creepy dilapidated house inside the ruined stone yard
- Haunted Interior -- cauldrons, pentagrams, demon heads, and other decorations for the inside of your Haunted House
Terms & Conditions for products by Fat Dragon Games can be viewed HERE.
Log In 
